About Us
Product development technology
Principle introduction
The instrument is the product of electronic skills and mechanical transmission. It adopts mechatronics design and is mainly composed of force sensor, transmitter, microprocessor, load driving mechanism, computer and color inkjet printer.
It can carry out many functional experiments such as peeling, stretching, compression, bending and shearing on various materials, and has the characteristics of wide measurement range, high precision and fast response. And the experimental data can be displayed, recorded and printed in time.
Scope of application
It is suitable for peeling/release performance test of adhesive tape, protective film, label, release film (paper) and other products to detect the adhesive strength, anti-peeling performance and anti-release performance of adhesive materials. It can be tested for 180-degree peeling, 90-degree peeling, annular initial adhesion and shear strength.
R&D equipment
Compliance with standard Reference standard
GB/T 2792-2014 Test method for peel strength of adhesive tapes
ASTM D3330-2004 Pressure Sensitive Tape Peel Adhesion Test Method
ISO 29862-2007 Self-adhesive tapes-Determination of resistance to peel adhesion
GBT 17554.1-2006 peel strength test method
GB 7753-1987 Test method for tensile properties of pressure-sensitive adhesive tapes
GBT 2792-1998 Test Method for 180 ° Peel Strength of Pressure-Sensitive Adhesive Tapes
GB-T2790-1995 peel strength standard
YYT 0148-2006 General Requirements for Medical Tape
FTM1-FINAT test method NO.1_180 peeling force test (peeling speed 300mmmin)
FTM2-FINAT Test Method NO.2_90 ° Peel Force Test (Peel Speed 300mmmin)
FTM3-FINAT test method NO.3_adhesive low-speed release force test
Technical parameter Parameter
|
Capacity selection |
1, 2, 5, 10, 20, 50kg optional (standard 5kg) |
|
Accuracy level |
Level 1 |
|
The lower limit can be measured |
1.2g |
|
Strength units |
Kgf、gf、N、kN、lbf optional |
|
Peel strength unit |
N/mm、N/cm、N/m、kN/mm、kN/cm、kN/mg/mm、g/em、g/m、kg/mm、kg/cm、kg/m、ibf/in、g/in、kgf/inoptional |
|
Speed of experimentation |
0.1-500mm/min |
|
Rotation velocity |
500mm/min |
|
Force resolution |
0.001g (1/250000 is not divided inside and outside, and the resolution of the whole process remains unchanged) |
|
Displacement resolution |
0.001mm |
|
itinerary |
Clamp 550mm without clamp (optional 1050mm). |
|
Control mode |
Touchscreen control |
|
Dimensions |
W 450mmxD430mmXH 1140mm |
|
Power/Power |
220VAC士10%50Hz /200W |
|
weight |
Approx. 35kg |
Instrument characteristics
Well-known brand of force value sensing system, providing better than 1 level of force value accuracy, better repeatability, multi range selection;
Well-known brands of stepping operation system, with precision ball screw, to provide better than 1 level of speed accuracy, stepless speed regulation, smooth operation;
Limit protection, overload protection, automatic return and other intelligent design, to ensure the safety of operation;
Advanced and reasonable structural design, with reliable automation management and control functions, can adapt to long-term, stable, safe and reliable testing needs;
Meet GB, ISO, ASTM a variety of test standards, test methods can be arbitrarily selected;
Support group test data comparison analysis, with multi-unit conversion function
Software introduction
As we all know, the control system is the soul of an instrument, and the hardware that makes up the system provides the basis for measurement,
But only in the support of the control system, in order to achieve the perfect function of the hardware, give full play to its potential, so that the total
body function and performance.
Yunteng experimental parameter Experimental parameters
|
The name of the metric |
index |
Test results |
|||
|
Type I |
Type II |
Type I (longitudinal/horizontal). |
Type II (Width/Width) |
||
|
Tensile force M/cm |
》100 |
》160 |
146/138 |
241/210 |
|
|
Elongation at break% |
》150 |
》200 |
230/210 |
260/267 |
|
|
Dimensional change rate of heat treatment |
《 1.5 |
《 1 |
0.4-0.7 |
0.4-0.6 |
|
|
Low temperature bendability |
-20°C no cracks |
-25°C without clefts |
No cracks |
No cracks |
|
|
Puncture resistance |
No water seepage |
No water seepage |
No water seepage |
||
|
Impermeable |
Don't talk about water |
No water seepage |
No water seepage |
||
|
Adhesion in the shear state ≥ 3.0M/mm or break at the seam |
passing |
passing |
|||
|
Heat aging treatment |
There are no bubbles, no bonding and no holes in the appearance |
passing |
passing |
||
|
Rate of change in tensile force% |
±25 |
±20 |
+1/-2 |
+2/+2 |
|
|
The break elongates to a change car% |
-6/o |
+4/-3 |
|||
|
Defamation of warmth and flexibility |
-15°C no cracks |
-20°C no cracks |
No cracks |
No cracks |
|
|
Chemically resistant |
Rally change car% |
±25 |
±20 |
-2/-3 |
-3/+5 |
|
Change in elongation at break% |
-4/-6 |
-4/-6 |
|||
|
Low temperature bendability |
-15°C no cracks |
-20°C no cracks |
No cracks |
No cracks |
|
|
Artificial climate is aging at an accelerated pace |
Rally change car% |
±25 |
±20 |
-2/+4 |
-2/+4 |
|
Break elongation vehicle varies% |
-3/-1 |
-3/-1 |
|||
|
Low temperature bendability |
-15°C no cracks |
-20°C no cracks |
No cracks |
No cracks |
|
The factory covers an area of 10000 square meters. The company not only possesses exquisite processing technology and advanced production equipment, but also has formed a group of outstanding technical talents with similar aspirations
Contact Us
2nd Floor, Building F, Zhomeni Elevator Industrial Park, West District, Zhongshan City.